top of page
EN
E335
DIN
St60-2
SAE / AISI / ASTM
BS
AFNOR
A60-2
Equivalent Steel Grades
Material No
1.0060
Chemical Composition (%)
EN 10025 (DIN 17100)
C
Si
Mn
P
S
Cr
Ni
Mo
N
Pb
Min
Max
0.045
0.045
0.012
295
80 < t ≤ 100
305
63 < t ≤ 80
315
40 < t ≤ 63
325
16 < t ≤ 40
335
t < 16
Min
Thickness (mm)
Diameter (mm)
YIELD STRENGTH (Re) (N/mm² = MPa)
Condition of the Sample:
Mechanical Properties
710
540
3 ≤ t ≤ 100
710
550
3 ≤ t ≤ 100
710
570
3 ≤ t ≤ 100
770
590
t < 3
Max
Min
Thickness (mm)
Diameter (mm)
TENSILE STRENGTH (Rm) (N/mm² = MPa)
Thickness (mm)
Diameter (mm)
ELONGATION (%)
16
3 < t ≤ 40
15
40 < t ≤ 63
14
63 < t ≤ 100
12
100 < t ≤ 150
11
150 < t ≤ 250
HARDNESS (HB)
+AR
+N
+A
The difference between S355J2 steel and S355JR steel is that a Charpy notch impact test has been applied.
S355J2 steel has a minimum impact energy of 27 joules (KV) at a temperature of −20 °C.
Kanat Çelik Sanayi ve Ticaret A.Ş.
Contact Us
Akçaburgaz Mah. 3038. Sok No:1
Esenyurt, 34522 İstanbul - Turkey
t: 0212 671 38 38
m: 0535 715 11 22 (whatsApp)
Disclaimer
This page has been prepared in good faith for informational purposes only.
The accuracy, completeness, and timeliness of the information are not guaranteed or warranted by Kanat Çelik Sanayi ve Ticaret A.Ş.
.png)
bottom of page