top of page
EN
S355J2G3
DIN
St52-3 +N
SAE / AISI / ASTM
BS
AFNOR
Equivalent Steel Grades
Material No
1.0570
Chemical Composition (%)
EN 10025 (DIN 17100)
C
Si
Mn
P
S
Cr
Ni
Mo
Cu
Pb
Min
0.025
Max
0.24
0.55
1.60
0.035
0.035
0.55
265
250 < t ≤ 500
275
100 < t ≤ 250
315
t ≤ 100
Min
Thickness (mm)
Diameter (mm)
YIELD STRENGTH (Re) (N/mm² = MPa)
Condition of the Sample:
Mechanical Properties
450
250 < t ≤ 500
450
100 < t ≤ 250
490
t ≤ 100
Max
Min
Thickness (mm)
Diameter (mm)
TENSILE STRENGTH (Rm) (N/mm² = MPa)
Min
Thickness (mm)
Diameter (mm)
ELONGATION (%)
20
t ≤ 100
18
100 < t ≤ 250
18
250 < t ≤ 500
HARDNESS (HB)
+AR
+N
+A
The difference between S355J2 steel and S355JR steel is that a Charpy notch impact test has been applied.
S355J2 steel has a minimum impact energy of 27 joules (KV) at a temperature of −20 °C.
Kanat Çelik Sanayi ve Ticaret A.Ş.
Contact Us
Akçaburgaz Mah. 3038. Sok No:1
Esenyurt, 34522 İstanbul - Turkey
t: 0212 671 38 38
m: 0535 715 11 22 (whatsApp)
Disclaimer
This page has been prepared in good faith for informational purposes only.
The accuracy, completeness, and timeliness of the information are not guaranteed or warranted by Kanat Çelik Sanayi ve Ticaret A.Ş.
.png)
bottom of page